| DIN11864 gaskets
The DIN11864 is a relatively new fitting for the pharmaceutical processing market. This fitting is gaining interest from process engineers because the seal inside is better to control. The fitting has a compression limiter build in so intrusion of the gasket material inside the pipe is reduced to the absolute minimum. |

Mix of DIN11864 gaskets | The DIN11864 is available in 3 versions: 11864-1 has a screwed connection 11864-2 has a flange connection 11864-3 has a clamp connection
All of these use the same O-ring type gasket.
Pipe size standards available: DIN11850 ISO1127 ASME BPE
Dimensions: DIN11850 DN10 through to DN300 ISO1127 DN10 through to DN200 ASME BPE 1/2” through to 4”
Compounds: EPDM, FKM, PTFE, TUF-STEEL, FEP encapsulated FKM, Platinum Silicone
Compliance: Elastomers FDA CFR 177.2600, USP Class VI PTFE FDA CFR 177.1550, USP Class VI





 |
All rights reserved Ultrapharma. | |