The Controlled Compression Gasket (CCG) can not be over-tightened. The CCG is composed of a Rubber Fab elastomer with a ring of Ultem® vulcanized inside the gasket. This non-compressible ring controls clamp compression to exactly the correct amount, allowing the properly positioned gasket to make a perfect surface I.D. seal with the ferrules.
Available elastomers:
EPDM, FKM fluoroelastomer, Silicone
Available sizes:
1” through 3”
|
Assembled CCG, with a smooth ID.
Controlled Compression Gaskets with TAB and without. |
